[100% Valid Cisco Questions] Discount Cisco 300-115 Dumps SWITCH Study Guide Free Download With The Youtube Knowledge And Skills

What are the best study tools for the Cisco 300-115 dumps? The Implementing Cisco IP Switched Networks (300-115 SWITCH) exam is a 120 minutes (30-40 questions) assessment in pass4itsure that is associated with the MCP certification.”Implementing Cisco IP Switched Networks” is the exam name of Pass4itsure Cisco 300-115 dumps test which designed to help candidates prepare for and pass the Cisco 300-115 exam. Discount Cisco 300-115 dumps SWITCH study guide free download With the Youtube knowledge and skills. Pass4itsure not only provide Cisco https://www.pass4itsure.com/300-115.html dumps which have high quality to each candidate, but also provides a comprehensive after-sales service.

[100% Valid Cisco 300-115 Dumps Questions]: https://drive.google.com/open?id=0BwxjZr-ZDwwWLW41Sk5QSDdPTFU

[100% Valid Cisco 210-260 Dumps Questions]: https://drive.google.com/open?id=0BwxjZr-ZDwwWU0xad3NvRWR4Qzg

300-115 dumps

Pass4itsure Free Cisco 300-115 Dumps Exam Questions and Answers:

A switch is added into the production network to increase port capacity. A network engineer is configuring the switch for
DHCP snooping and IP Source Guard, but
is unable to configure ip verify source under several of the interfaces.
Which option is the cause of the problem?
A. The local DHCP server is disabled prior to enabling IP Source Guard.
B. The interfaces are configured as Layer 3 using the no switchport command.
C. No VLANs exist on the switch and/or the switch is configured in VTP transparent mode.
D. The switch is configured for sdm prefer routing as the switched database management template.
E. The configured SVIs on the switch have been removed for the associated interfaces.
300-115 exam Correct Answer: B
Which command correctly configures standby tracking for group 1 using the default decrement priority value?
A. standby 1 track 100
B. standby 1 track 100 decrement 1
C. standby 1 track 100 decrement 5
D. standby 1 track 100 decrement 20
Correct Answer: A
Which database is used to determine the validity of an ARP packet based on a valid IP-to- MAC address binding?
A. DHCP snooping database
B. dynamic ARP database
C. dynamic routing database
D. static ARP database
300-115 dumps Correct Answer: A
RSPAN has been configured on a Cisco Catalyst switch; however, traffic is not being replicated to the remote switch.
Which type of misconfiguration is a cause?
A. The RSPAN designated VLAN is missing the remote span command.

B. The local and remote RSPAN switches are configured using different session IDs.
C. The local RSPAN switch is replicating only Rx traffic to the remote switch.
D. The local switch isoverloaded with the amount of sourced traffic that must be replicated to the remote switch.
Correct Answer: A
Refer to the exhibit.
300-115 dumps

When a network administrator is attempting an SSH connection to the device, in which order does the device check the
login credentials?
A. RADIUS server, localusername, line password
B. RADIUS server, line password, local username
C. Line password, local username, RADIUS server
D. Line password, RADIUS server, local username
300-115 pdf Correct Answer: A
It a switch stack is configured to used SDM templates, where are the templates stored?
A. stack master
B. TFTP server
C. flash memory
D. all stack members
Correct Answer: A

What is the default interval at which Cisco devices send Cisco Discovery Protocol advertisements?
A. 30 seconds
B. 60 seconds
C. 120 seconds
D. 300 seconds
300-115 vce Correct Answer: B
Which portion of AAA looks at what a user has access to?
A. authorization
B. authentication
C. accounting
D. auditing
Correct Answer: A
Refer to the exhibit.
300-115 dumps

Which option describes the reason for this message in a GLBP configuration?
A. Unavailable GLBP active forwarder
B. Incorrect GLBP IP address
C. HSRP configured on same interface as GLBP
D. Layer 2 loop
300-115 exam Correct Answer: D
What condition was match during etherchannel configuration.
A. Spanning tree port priority
B. Spanning tree cost
C. Interface Description

D. Trunk mode
E. Trunk allow vlan
Correct Answer: DE
An EtherChannel bundle has been established between a Cisco switch and a corporate web server. The network
administrator noticed that only one of the EtherChannel links is being utilized to reach the web server. What should be
done on the Cisco switch to allow for better EtherChannel utilization to the corporate web server?
A. Enable Cisco Express Forwarding to allow for more effective traffic sharing over the EtherChannel bundle.
B. Adjust the EtherChannel load-balancing method based on destination IP addresses.
C. Disable spanning tree on all interfaces that are participating in the EtherChannel bundle.
D. Use link-state tracking to allow for improved load balancing of traffic upon link failure to the server.
E. Adjust the EtherChannel load-balancing method based on source IP addresses.
300-115 dumps Correct Answer: E
Routers R1 and R2 are configured for HSRP as shown below:
Router R1: interface ethernet 0 ip address standby 35 ip standby 35 priority 100
interface ethernet 1 ip address standby 34 ip Router R2: interface ethernet 0 ip
address standby 35 ip interface ethernet 1 ip address
standby 34 ip standby 34 priority 100 You have configured the routers R1 andamp;R2 with HSRP. While
debugging router R2 you notice very frequent HSRP group state transitions. What is the most likely
cause of this?
A. physical layer issues
B. no spanning tree loops
C. use of non-default HSRP timers
D. failure to set the command standby 35 preempt
Correct Answer: A
Refer to the exhibit. Based upon the output of show vlan on switch CAT2, what can we conclude about interfaces
Fa0/13 and Fa0/14?

300-115 dumps

A. That interfaces Fa0/13 andFa0/14 are in VLAN 1
B. That interfaces Fa0/13 and Fa0/14 are down
C. That interfaces Fa0/13 and Fa0/14 are trunk interfaces
D. That interfaces Fa0/13 and Fa0/14 have a domain mismatch with another switch
E. That interfaces Fa0/13 and Fa0/14 have a duplexmismatch with another switch
300-115 pdf Correct Answer: C
When using EtherChannel misconfiguration guard, which technology is used to prevent this type of misconfiguration
from affecting the network?
B. port security
Correct Answer: A
You have been asked to install and configure a new switch in a customer network. Use the console access to the
existing and new switches to configure and verify correct device configuration.

300-115 dumps

300-115 dumps

300-115 dumps

You are connecting the New_Switch to the LAN topology; the switch has been partially configured and you need to
complete the rest of configuration to enable PC1 communication with PC2. Which of the configuration is correct?

300-115 dumps

A. Option A
B. Option B
C. Option C
D. Option D

E. Option E
300-115 vce Correct Answer: D
Refer to the exhibit.
300-115 dumps

What is the result of the configuration?
A. The EtherChannels would not form because the load-balancing method must match on the devices.
B. The EtherChannels would form and function properly eventhough the load-balancing and EtherChannel modes do not match.
C. The EtherChannels would form, but network loops would occur because the load-balancing methods do not match.
D. The EtherChannels would form and both devices would use the dst-ip load-balancing method because Switch1 is
configured with EtherChannel mode active.
300-115 exam Correct Answer: B
300-115 dumps

If you are using our Cisco 300-115 dumps exam trainings, we will let you enjoy one year of free updates. So that you can get the latest exam information in time. We will be use the greatest efficiency to service each candidate. Pass4itsure is the only one able to provide you the best and fastest updating information about Cisco certification https://www.pass4itsure.com/300-115.html dumps exam.